The design, fabrication, and characterization of polymer-carbon nanotube composites [electronic resource] / Clayton, LaNetra. [Tampa, Fla.] : University of South Florida, 2005. eng ABSTRACT: The design, fabrication, and characterization of polymer-carbon nanotube (CNT) composites have generated a significant amount of attention in the fields of materials science and polymer chemistry. The challenge in fabricating composites that exploit the unique properties of the CNT and the ideal processing ability and low cost of the polymer is in achieving a uniform dispersion of the filler in the polymer matrix. This body of work focuses on (1) techniques employed to disperse CNTs into a polymer matrix and (2) the effects of CNTs on the mechanical and electrical properties of the polymer. Poly (methyl methacrylate) (PMMA), an amorphous polymer, and poly (4-methyl-1-pentene) (P4M1P), a semi crystalline polymer, were chosen as the matrices. Non-functionalized single-walled carbon nanotubes and soot (unpurified carbon nanotubes) were chosen as the filler material. In the first study, single-walled carbon nanotubes (SWNTs) were sonicated in methyl methacrylate monomer and initiated via thermal energy, UV light, and gamma radiation. Composite films with increased dielectric constants and unique optical transparency were produced. Samples were characterized using differential scanning calorimetry, dielectric analysis, and dynamic mechanical analysis. Refractive Indices were obtained and correlated to the dielectric constant using Maxwells relationship. PMMA/soot composites were fabricated in the second study. Dispersion was accomplished by way of sonication and melt compounding. The PMMA/soot composites were exposed to gamma radiation, with a 137Cs gamma source, in order to investigate how the filler affects the polymers ability to resist radiation. Samples were characterized by differential scanning calorimetry, dielectric analysis, and dynamic mechanical. Thesis (Ph.D.)--University of South Florida, 2005. Includes bibliographical references. Text (Electronic thesis) in PDF format. System requirements: World Wide Web browser and PDF reader. Mode of access: World Wide Web. ABSTRACT: The design, fabrication, and characterization of polymer-carbon nanotube (CNT) composites have generated a significant amount of attention in the fields of materials science and polymer chemistry. The challenge in fabricating composites that exploit the unique properties of the CNT and the ideal processing ability and low cost of the polymer is in achieving a uniform dispersion of the filler in the polymer matrix. This body of work focuses on (1) techniques employed to disperse CNTs into a polymer matrix and (2) the effects of CNTs on the mechanical and electrical properties of the polymer. Poly (methyl methacrylate) (PMMA), an amorphous polymer, and poly (4-methyl-1-pentene) (P4M1P), a semi crystalline polymer, were chosen as the matrices. Non-functionalized single-walled carbon nanotubes and soot (unpurified carbon nanotubes) were chosen as the filler material. In the first study, single-walled carbon nanotubes (SWNTs) were sonicated in methyl methacrylate monomer and initiated via thermal energy, UV light, and gamma radiation. Composite films with increased dielectric constants and unique optical transparency were produced. Samples were characterized using differential scanning calorimetry, dielectric analysis, and dynamic mechanical analysis. Refractive Indices were obtained and correlated to the dielectric constant using Maxwells relationship. PMMA/soot composites were fabricated in the second study. Dispersion was accomplished by way of sonication and melt compounding. The PMMA/soot composites were exposed to gamma radiation, with a 137Cs gamma source, in order to investigate how the filler affects the polymers ability to resist radiation. Samples were characterized by differential scanning calorimetry, dielectric analysis, and dynamic mechanical. Adviser: Julie P. Harmon. Co-adviser: Nanotechnology. Poly(methyl methacrylate). Poly(4-methyl-1-pentene). Interfacial polarization. Dielectric analysis.
The design, fabrication, and characterization of polymer-carbon nanotube composites [electronic resource] /
Clayton, LaNetra.
[Tampa, Fla.] : University of South Florida,
2005.
eng
ABSTRACT: The design, fabrication, and characterization of polymer-carbon nanotube (CNT) composites have generated a significant amount of attention in the fields of materials science and polymer chemistry. The challenge in fabricating composites that exploit the unique properties of the CNT and the ideal processing ability and low cost of the polymer is in achieving a uniform dispersion of the filler in the polymer matrix. This body of work focuses on (1) techniques employed to disperse CNTs into a polymer matrix and (2) the effects of CNTs on the mechanical and electrical properties of the polymer. Poly (methyl methacrylate) (PMMA), an amorphous polymer, and poly (4-methyl-1-pentene) (P4M1P), a semi crystalline polymer, were chosen as the matrices. Non-functionalized single-walled carbon nanotubes and soot (unpurified carbon nanotubes) were chosen as the filler material.
In the first study, single-walled carbon nanotubes (SWNTs) were sonicated in methyl methacrylate monomer and initiated via thermal energy, UV light, and gamma radiation. Composite films with increased dielectric constants and unique optical transparency were produced. Samples were characterized using differential scanning calorimetry, dielectric analysis, and dynamic mechanical analysis. Refractive Indices were obtained and correlated to the dielectric constant using Maxwells relationship. PMMA/soot composites were fabricated in the second study. Dispersion was accomplished by way of sonication and melt compounding. The PMMA/soot composites were exposed to gamma radiation, with a 137Cs gamma source, in order to investigate how the filler affects the polymers ability to resist radiation. Samples were characterized by differential scanning calorimetry, dielectric analysis, and dynamic mechanical.
Thesis (Ph.D.)--University of South Florida, 2005.
Includes bibliographical references.
Text (Electronic thesis) in PDF format.
System requirements: World Wide Web browser and PDF reader.
Mode of access: World Wide Web.
ABSTRACT: The design, fabrication, and characterization of polymer-carbon nanotube (CNT) composites have generated a significant amount of attention in the fields of materials science and polymer chemistry. The challenge in fabricating composites that exploit the unique properties of the CNT and the ideal processing ability and low cost of the polymer is in achieving a uniform dispersion of the filler in the polymer matrix. This body of work focuses on (1) techniques employed to disperse CNTs into a polymer matrix and (2) the effects of CNTs on the mechanical and electrical properties of the polymer. Poly (methyl methacrylate) (PMMA), an amorphous polymer, and poly (4-methyl-1-pentene) (P4M1P), a semi crystalline polymer, were chosen as the matrices. Non-functionalized single-walled carbon nanotubes and soot (unpurified carbon nanotubes) were chosen as the filler material.
In the first study, single-walled carbon nanotubes (SWNTs) were sonicated in methyl methacrylate monomer and initiated via thermal energy, UV light, and gamma radiation. Composite films with increased dielectric constants and unique optical transparency were produced. Samples were characterized using differential scanning calorimetry, dielectric analysis, and dynamic mechanical analysis. Refractive Indices were obtained and correlated to the dielectric constant using Maxwells relationship. PMMA/soot composites were fabricated in the second study. Dispersion was accomplished by way of sonication and melt compounding. The PMMA/soot composites were exposed to gamma radiation, with a 137Cs gamma source, in order to investigate how the filler affects the polymers ability to resist radiation. Samples were characterized by differential scanning calorimetry, dielectric analysis, and dynamic mechanical.
Adviser: Julie P. Harmon.
Co-adviser:
Nanotechnology.
Poly(methyl methacrylate).
Poly(4-methyl-1-pentene).
Interfacial polarization.
Dielectric analysis.